Browsing by Subject "pine"
Now showing items 1-6 of 6
-
(2019)Sphagnum moss could be used as a substitute for Sphagnum peat as a growing medium. It has the same positive physical properties as peat and it is also a more sustainable option. However, there are some indications that Sphagnum moss may have some inhibitory effects on vascular plant seed germination and seedling development. The aim of this study was to find out whether this is true and due to the low pH of different Sphagnum moss species. The tested moss species were Sphagnum fallax, Sphagnum medium, Sphagnum rubellum and Sphagnum spp. The seed germination on Sphagnum moss substrate was tested with lettuce, radish, basil, pine and ryegrass. Also, two additional seed germination experiments were done with lettuce. Seedling growth experiment on Sphagnum substrate was tested with lettuce. The first germination experiments indicated that the dicotyledon species basil, radish and lettuce are sensitive to the allelopathic effect caused by Sphagnum moss. In the case of ryegrass and pine no indication of seed germination inhibition was found. The two additional germination experiments confirmed that Sphagnum moss and white peat substrates and Sphagnum moss and white peat organic matter/water extracts were inhibiting lettuce seed germination. Added lime didn’t conclusively explain the inhibition in germination percentages of Sphagnum moss substrate when compared to control treatment gauze. Only in the case of radish the raised pH had positive effect on the germination percentage. Therefor it was concluded that the low germination percentage is not explained only by the naturally low pH of Sphagnum mosses and Sphagnum mosses’ other characteristics should be investigated in the future. In the seedling growth experiment done with lettuce on Sphagnum medium growing medium there was no indication of allelopathic effect on seed germination or seedling development. The allelopathic compounds were thought to have been lost in this experiment through leaching when the substrates were watered.
-
(2019)Sphagnum moss could be used as a substitute for Sphagnum peat as a growing medium. It has the same positive physical properties as peat and it is also a more sustainable option. However, there are some indications that Sphagnum moss may have some inhibitory effects on vascular plant seed germination and seedling development. The aim of this study was to find out whether this is true and due to the low pH of different Sphagnum moss species. The tested moss species were Sphagnum fallax, Sphagnum medium, Sphagnum rubellum and Sphagnum spp. The seed germination on Sphagnum moss substrate was tested with lettuce, radish, basil, pine and ryegrass. Also, two additional seed germination experiments were done with lettuce. Seedling growth experiment on Sphagnum substrate was tested with lettuce. The first germination experiments indicated that the dicotyledon species basil, radish and lettuce are sensitive to the allelopathic effect caused by Sphagnum moss. In the case of ryegrass and pine no indication of seed germination inhibition was found. The two additional germination experiments confirmed that Sphagnum moss and white peat substrates and Sphagnum moss and white peat organic matter/water extracts were inhibiting lettuce seed germination. Added lime didn’t conclusively explain the inhibition in germination percentages of Sphagnum moss substrate when compared to control treatment gauze. Only in the case of radish the raised pH had positive effect on the germination percentage. Therefor it was concluded that the low germination percentage is not explained only by the naturally low pH of Sphagnum mosses and Sphagnum mosses’ other characteristics should be investigated in the future. In the seedling growth experiment done with lettuce on Sphagnum medium growing medium there was no indication of allelopathic effect on seed germination or seedling development. The allelopathic compounds were thought to have been lost in this experiment through leaching when the substrates were watered.
-
(2022)Aim of this study is to develop biogeochemical exploration methods for cobalt. Several different samples were collected from study area, analyzed, and compared to each other. This study took place at Rautio village at North Ostrobothnia and more accurately over the Jouhineva mineralization. Jouhineva is well-known high-grade cobalt-copper-gold mineralization. Elements examined in this study are cobalt, copper, arsenic, zinc, selenium, and cadmium. Samples were collected from three different study profiles from the area. From these three profiles samples collected are: soil, pine, lingonberry, birch, rowan, and juniper. Water samples were collected around the study area from every location possible. Soil samples were analyzed with four different methods: Ionic leaching, aqua regia, weak leaching and pXRF. Ionic leaching and aqua regia had both elevated concentrations of cobalt, but in different locations depending on study profile. Ionic leaching detects rising ions from the ore and therefore elevated concentrations are found at different locations compared to aqua regia. Aqua regia results proved how different orientation of study profile, direction of the ore and glacial flow can affect to the anomalies of elemental concentration. Profile-2 was oriented differently to ore and glacial flow than Profile-1, and therefore elevated concentrations of cobalt and copper were not drifted away from the ore on Profile-2 like they were on Profile-1. Aqua regia and pXRF have very similar copper, arsenic and zinc results. Pine and lingonberry turn out to be the most promising plant species applied for cobalt exploration, and rowan appears to be most suitable for copper exploration. Lower detection limit could significantly improve pine analyses as exploration method and more extensive sampling could remove some of the uncertainties about the method. Lingonberry samples have elevated concentration of copper and arsenic. Birch and juniper produced somewhat unclear results. Despite this, cobalt and copper concentrations in birch leaves were elevated when compared to concentrations found in other studies. In addition to this birch is suitable for arsenic exploration. Juniper had elevated copper concentration in the study area compared to other studies. Water samples collected from the Jouhineva area yielded concentrations of cobalt, copper and arsenic that were above the average concentration in the Kalajoki area waters. Copper and arsenic were above the average concentration of the Kalajoki area in every sample collected from the study area. Cobalt was above the average concentration in all samples that were not collected directly from the pond formed in the old test mine. Zinc concentration was below the average limit in all samples collected from the area. Zinc concentration in the water samples collected from the pond is significantly lower compared to the other samples collected from the area.
-
(2014)In forest inventories, more and more detailed information about the constantly growing stock is intended to obtain both at national and at private forests level. At present, in forest planning the features describing wood quality are rarely estimated from standing trees since there are limited resources for the precise measurements of the trees due to high expenses. The principal aim of this study was to determine the precision whereby the externally reviewed predictive features of the internal quality of a log-size pine wood can be estimated manually using Terrestrial Laser Scanning (TLS). The examined features were tree height, diameter at breast height, upper diameter as well as the heights of the lowest dead and living branch. The second main objective was to determine the precision whereby the tree class can be predicted based on measured and derived tree attributes. The derived attributes were the volume of the wood, crown ratio, the relation of dead branched and branch free part of the tree to the tree height, and form factor. For forecasting the nearest neighbor method was used where the search for the nearest neighbors was performed using the Random Forest -method. The relative accuracy (RMSE %) of TLS data in relation to the reference field data was found to be 7.54% (bias -6.16%) for the tree height, 6.39% ( -2.46%) for the breast height diameter, 10.01% (0.40%) for the upper diameter, 9.21% ( -5.99%) for the height of the lowest living branch and 34.95% ( -1.47%) for the height of the lowest dead branch. On the prediction of the tree class indicating the stem quality, the TLS data reached 78 % classification accuracy (5 tree classes). With harsher three tree class categorization 87% classification accuracy was reached. Based on the results can be said that quality factors, such as the lowest branches can be measured from the TLS data with reasonably adequate accuracy. Also the prediction of the tree class turns out decently (5 classes) and with harsher categorization (3 classes) well. The forecasting method described in this study can still be improved for example by the automatic interpretation of the laser scanning data, as well as combining several laser scanning points from the examined target. The most potential near future application is that TLS data can work as reference for airborne laser scanning because for this purpose the harsher categorization accuracy seems to be already very promising.
-
(2014)Carbonization is thermochemical conversion, where biomass is thermally degraded in the absence of oxygen. Solid char, pyrolysis oil and non-condensable gases are produced from the biomass. Torrefaction is early phase of the carbonization in temperatures of 220–300 °C. Torrefied wood is promising as a renewable fuel for industrial use in coal co-combustion and gasification-combustion. Torrefaction and carbonization increase the higher heating value and fuel properties of wood compared to untreated wood. There’s a lack of knowledge in torrefaction and carbonization effects to higher heating value, carbon content and turn from endothermic to exothermic reaction of conifer zone wood species. Raw material was stemwood of birch (Betula pubescens) and pine (Pinus sylvestris) including bark. Trees were harvested from the Helsinki district and chipped, particle size 16 ? 8 mm. Samples were torrefied and carbonized at 250, 300, 350, 400 and 450 ?C without nitrogen flow. Carbon content (%), higher heating value (MJ/kg), mass yield (%) and turn of endothermic to exothermic reaction were inspected. Carbon content of untreated birch and pine increased from 47 % to 82 % (at 450 ?C). Higher heating value exceeded 26 MJ/kg at 300 ?C and 28 MJ/kg at 400 ?C, reaching bituminous coal’s values. Mass yield declined to 45–54 % of the initial mass at 300 °C. In low temperature, gradual exothermic peak was observable. In higher temperatures peak was evident. Carbonization and torrefaction improved the higher heating value and carbon content of wood but decreased the solid char yield.
-
(2014)Carbonization is thermochemical conversion, where biomass is thermally degraded in the absence of oxygen. Solid char, pyrolysis oil and non-condensable gases are produced from the biomass. Torrefaction is early phase of the carbonization in temperatures of 220–300 °C. Torrefied wood is promising as a renewable fuel for industrial use in coal co-combustion and gasification-combustion. Torrefaction and carbonization increase the higher heating value and fuel properties of wood compared to untreated wood. There’s a lack of knowledge in torrefaction and carbonization effects to higher heating value, carbon content and turn from endothermic to exothermic reaction of conifer zone wood species. Raw material was stemwood of birch (Betula pubescens) and pine (Pinus sylvestris) including bark. Trees were harvested from the Helsinki district and chipped, particle size 16 ≤ 8 mm. Samples were torrefied and carbonized at 250, 300, 350, 400 and 450 ˚C without nitrogen flow. Carbon content (%), higher heating value (MJ/kg), mass yield (%) and turn of endothermic to exothermic reaction were inspected. Carbon content of untreated birch and pine increased from 47 % to 82 % (at 450 ˚C). Higher heating value exceeded 26 MJ/kg at 300 ˚C and 28 MJ/kg at 400 ˚C, reaching bituminous coal’s values. Mass yield declined to 45–54 % of the initial mass at 300 °C. In low temperature, gradual exothermic peak was observable. In higher temperatures peak was evident. Carbonization and torrefaction improved the higher heating value and carbon content of wood but decreased the solid char yield.
Now showing items 1-6 of 6