Skip to main content
Login | Suomeksi | På svenska | In English

Browsing by Subject "hemicellulose"

Sort by: Order: Results:

  • Enzymatic treatment of softwood kraft pulp at high and low consistency 
    Spönla, Elisa (2020)
    The aim of the thesis was to study enzymatic treatment as a way to modify paper grade pulp to be a suitable raw material for the future textile industry. Wood as a raw material is an environmentally friendly option for textile production but its sustainable exploitation is not easy. Currently, ionic liquids are assumed to enable a safe and sustainable process for the production of wood-based regenerated fibres. These processes commonly use dissolving pulp as their raw material but replacing dissolving pulp with a paper grade kraft pulp would decrease environmental impact and production expenses. In this work, molar mass distribution of softwood paper grade kraft pulp was selectively modified using enzymes. Enzymes were utilized instead of acids because of their favourable abilities to selectively modify targeted polymers and to increase fibre porosity. Enzymatic modifications of softwood kraft pulp were performed to decrease degree of polymerization of cellulose and lower the quantity of hemicellulose. Hydrolysis of cellulose was catalysed with endo-1,4-β-glucanase (endoglucanase) and hemicellulose was degraded using endo-1,4-β-mannanase and endo-1,4-β-xylanase. The treatments were carried out both at high (20%) and low (3%) pulp consistency to examine the synergistic effect of enzymatic and mechanical action arising in the high consistency treatment. Additionally, influence of different enzyme combinations on the pulp properties was studied. The modified pulp samples were characterized by determining intrinsic viscosity, molar mass distribution, yield loss, and its composition. The fibres were imaged with light microscopy. The degree of polymerization of the pulp cellulose was successfully decreased with a relatively small endoglucanase dose. The amount of hemicellulose was reduced by removing 11% of the total galactoglucomannan and 40% of the total arabinoglucuronoxylan. The high consistency treatments decreased intrinsic viscosity 1.9 times more on average than the low consistency treatments. The high consistency treatments were effective with low enzyme doses, easy to control, and reliably repeated. Therefore, enzymatic pulp treatment at high consistency seems to be a compatible way to modify paper grade kraft pulp to suitable raw material for textile production. Further studies related to pulp dissolution in ionic liquids, fibre spinning, and fibre regeneration should be concluded to confirm applicability of the modified fibres.
  • Ristisidotut galaktoglukomannaanikalvot 
    Schmidt, Jutta (2013)
    Increasing the use of biodegradable packaging materials could reduce the need of petroleumbased plastics. Hemicelluloses are a potential source of renewable raw material for packaging purposes. The literature review focused on polysaccharide-based packaging materials and properties of food packaging materials. In addition, crosslinking polysaccharides with citric acid and ammonium zirconium carbonate (AZC) were discussed. The objective of the experimental study was to prepare self-standing films from spruce galactoglucomannan (GGM), and to study their properties. The aim was to enhance the mechanical and permeability properties, and make the films less sensitive to moisture, via crosslinking. Crosslinking was carried out in solution and sorbitol was used as plasticiser. The films were prepared by a casting method and dried at room temperature. Tensile strength, elongation at break and Young’s modulus were measured by tensile testing. In addition, oxygen permeabi lity, water vapour permeability and water solubility of films were measured. The effect of moisture on films was investigated with sorption isotherm and humidity scanning dynamic mechanical analysis. Citric acid did not function as a crosslinking agent, but acted more as a plasticiser increasing elongation. The heating required for the crosslinking reaction should be performed in dry film instead of solution. Crosslinking with AZC resulted in strong films, with tensile strength up to 52 MPa. Sorbitol addition decreased the tensile strength and Young’s modulus, but increased the elongation, as expected. Crosslinking and sorbitol addition both decreased water vapour permeability, resulting in a better water vapour barrier. The deviations in oxygen permeability measurements were high, but it looks like crosslinking with AZC results in better oxygen barrier. In high relative humidity (RH) the film with AZC absorbed less water vapour and the storage modulus decreased slower than in the non-crosslinked film. Thus, crosslinking with AZC made the properties of GGM films less susceptible to changes in RH. AZC appears to be a promising crosslinking agent for hemicellulose films, therefore the suitability for food packaging applications should be further studied.

Yhteystiedot

HELSINGIN YLIOPISTO