Browsing by Author "De Meulder"

Amorphous metal oxides have proven to deform in a plastic manner at microscopic scale. In this study the plastic deformation and elastic properties of amorphous metal oxides are studied at microscopic scale using classical molecular dynamics simulations. Amorphous solids differ from crystalline solids by not having a regular lattice nor long range order. In this study the amorphous materials were created in simulations by melt-quenching. The glass transition temperature (Tg) depends on the material and cooling rate. The effect of cooling rate was studied with aluminiumoxide (Al2O3) by creating a simulation cell of 115 200 atoms and melt-quenching it with cooling rates of 1011 , 1012 and 1013 K/s. It was observed that faster cooling rates yield higher Tg. The Al2O3 was cooled to 300 K and 50 K after which the material was stretched. The stress-strain curve of the material showed that samples with higher Tg deforms in plastic manner with smaller stresses. The system stretched at 50 K had higher ultimate tensile strength than the system stretched at 300 K and thus confirming the hypothesis proposed by Frankberg about activating plastic flow with work. In order to see if the plastic phenomena can be generalized to other amorphous metal oxides the tensile simulation was performed also with a-Ga2O3 by creating a simulation cell of 105 000 atoms, melt-quenching it and then stretching. Due to the lack of parameters for Buckingham potential these parameters were fitted with GULP using the elastic properties and crystalline structure of Ga2O3. The elastic properties of Ga2O3 with the fitted potential parameters agreed very well with the literature values. The elongated a-Ga2O3 behaved in a very similar fashion compared to a-Al2O3 cooled with the same cooling rate. Further work is needed to establish the Buckingham potential parameters of a-Ga2O3 by experimen tal work. The potential can also be developed further by using the elastic constants and structures of amorphous a-Ga2O3 in the fitting process, although the potential shows already very promising results.