Browsing by study line "Aerosolifysiikka"
Now showing items 1-18 of 18
-
(2024)Volatile Organic Compounds are chemicals which get released as gasses and can have a variety of effects on the environment, climate change, and air quality. Capable of being transported across long distances, VOCs can contribute to the formation and concentration of ozone, formation of secondary organic aerosol, and affect Earth's radiative balance. Coastal waters emit high amounts of VOCs into the atmosphere. While there is a body of research on VOCs emitted from terrestrial sources, such as forests, the impact of VOCs emitted from coastal sea areas on sea-atmosphere interactions is less understood. This study examined VOC signals at a coastal site on the Baltic Sea by deploying a Vocus Proton Transfer Reaction Time-of-Flight Mass Spectrometer measuring ambient VOCs in air from June-August 2023. In this study, the Vocus PTR-TOF-MS was able to provide informative data to improve our understanding of the behavior of VOCs at this Baltic Sea coastal site. From a snapshot analysis of July 17-24 2023, isoprene, monoterpenes, dimethylsulfide, jasmonic acid, and benzoquinone are speculated to potentially have marine signatures, but could be coming from different marine sources or different biological species in the Baltic Sea. The behavior of the VOC signals and their detection is speculated to be related to wind speed and wind direction. Meteorological factors can impact what VOC signals get detected by the Vocus by affecting how air masses get mixed and transported to the instrument. By deploying the relatively new Vocus PTR-TOF-MS in a new location, this study helps to improve our knowledge of the behavior of VOCs at this Baltic Sea coastal site and how the ecology of the Baltic Sea interacts with the atmosphere.
-
(2020)This thesis presents the Atmospherically Relevant Chemistry and Aerosol Box Model (ARCA box), which is used for simulating atmospheric chemistry and the time evolution of aerosol particles and the formation of stable molecular clusters. The model can be used for example in solving of the concentrations of atmospheric trace gases formed from some predefined precursors, simulation and design of smog chamber experiments or indoor air quality estimation. The backbone of ARCAs chemical library comes from Master Chemical Mechanism (MCM), extended with Peroxy Radical Autoxidation Mechanism (PRAM), and is further extendable with any new reactions. Molecular clustering is simulated with the Atmospheric Cluster Dynamics Code (ACDC). The particle size distribution is represented with two alternative methods whose size and grid density are fully configurable. The evolution of the particle size distribution due to the condensation of low volatile organic vapours and the Brownian coagulation is simulated using established kinetic and thermodynamic theories. The user interface of ARCA differs considerably from the previous comparable models. The model has a graphical user interface which improves its usability and repeatability of the simulations. The user interface increases the potential of ARCA being used also outside the modelling community, for example in the experimental atmospheric sciences or by authorities.
-
(2020)Urban areas account for 70% of worldwide energy-related CO2 emissions and play a significant role in the global carbon budget. With the enhanced consumption of fossil fuel and the dramatic change in land use related to urbanization, control and mitigation of CO2 emissions in the urban area is becoming a major concern for urban dwellers and city managers. It is of great importance and demand to estimate the local CO2 emissions in urban areas to assess the effectiveness of mitigation regulation. Surface Urban Energy and Water Balance Scheme (SUEWS) incorporated with a CO2 exchange module provides an advanced method to model total urban CO2 flux and quantify the different local-scale emission sectors involving transportation, human metabolism, buildings and vegetation. Using appropriate input data such as detailed site information and meteorological condition, it can simulate the local or neighbourhood scale CO2 emissions in a specific period, or even under a future scenario. In this study, the SUEWS model is implemented in an urban region, Jätkäsaari, which is an extension of Helsinki city centre, to simulate anthropogenic and biogenic CO2 emissions in the past and future. The construction of this district started in 2009 and was planned to be completed in 2030. Therefore, this region is a good case to investigate the impacts of urban planning on urban CO2 emissions. Based on the urban surface information, meteorological data, and abundant emission parameters, a simulation in this 1650 × 1400 m area with the spatial resolution of 50 × 50 m and the time resolution of an hour was conducted with the aim to get information on the total annual CO2 emissions, and the temporal and spatial variability of CO2 fluxes from different sources and sink in 2008 and 2030. The positive CO2 fluxes indicate the CO2 sources, while the negative indicate the CO2 sinks. In both of the previous and future case, the spatial variation of net CO2 fluxes in Jätkäsaari is dominated by the distribution of traffic and human activities. From April to September, the vegetation acts as the CO2 sink with negative net ecosystem exchange. In 2008, the modelled cumulative CO2 flux is 3.0 kt CO2 year-1, consisting of 1.9 kt CO2 year-1 from metabolism, 1.9 kt CO2 year-1 from traffic, 0.5 kt CO2 year-1 from soil and vegetation respiration, as well as -1.3 kt CO2 year-1 from photosynthesis. In 2030, the total annual CO2 emissions increase to 11.1 kt CO2 year-1 because of the rising traffic volume and amount of inhabitants. Road traffic became the dominant CO2 sources, accounting for 53% of the total emissions. For the diurnal variation, in 2008, the study area remains the CO2 sources with the exception of summertime morning when the net CO2 flux is negative, while in 2030, the net CO2 flux is positive in the whole day.
-
(2023)Atmospheric aerosols are solid or liquid phase particles which are suspended in ambient air. These particles have an impact on the climate through direct and indirect radiative forcing, and their measurement presents challenges in high latitude environments where concentrations may fall under the detection limit of the responsible instruments. In order to both qualify and quantify the contribution of aerosol particles to environmental change at higher latitudes, it is important to understand their microphysical and optical properties, which control their interaction with visible wavelength radiation. This thesis focuses on the characterisation of the aforementioned aerosol properties in a High Arctic environment, Villum Research Station (Northeast Greenland), during two six-month observation periods in 2020 and 2021. The parameters presented in the analysis are particle total number concentration and size distribution in the 0.3 - 10 μm size range, particle scattering coefficients σsp, particle absorption coefficients σap, and Ångström exponents describing the wavelength dependence of both optical coefficients. The seasonal variability and distribution of these properties was analysed, and case studies of exceptional particle number concentration identified as particle transport events to evaluate the contribution of local and long-distance source regions to the overall aerosol population at the station. The results of the analysis show that there is a notable seasonality to both number concentration and optical characteristics of aerosol particles at Villum Research Station, with median values for these parameters at their highest in the winter, followed by the autumn and then the summer. The dominant species during episodes of exceptional particle number concentrations were found to be dust, Elemental Carbon/Organic Carbon (EC/OC) and mixed aerosols, with source regions across continental Greenland, the Canadian Archipelago and Arctic Ocean.
-
(2024)The spread of the global pandemic COVID-19 has revealed gaps in knowledge of the spread of airborne diseases. More research is needed to mitigate, to find best protective practices and to prevent future incidents. Human cough offers an effective pathway for virions to spread between people and should therefore be in the focal point of the research. Artificial coughing would be of great help when studying for example spreading of virions in space or effectiveness of different protective measures aimed to hinder the diseases from spreading. For these needs a novel artificial coughing head robot is here presented. This microcontroller-operated coughing head aerosol generator has been developed in Tampere University Aerosol Physics Laboratory in collaboration with Technical Research Centre of Finland Ltd., VTT. It applies proportional valve and expansion tank to produce coughs from pressurized air. Coughed aerosol is produced by shear forces of air flow guided through a mesh grid wetted with artificial saliva. The presented aerosol generator can produce realistic human-like coughs that contain up to 3,1 x 106 aerosol particles per cough. Diameter of the particles is lognormally distributed, having an aerodynamic geometric mean diameter of 1,29 (±0,07) μm and geometric standard deviation of 2,89 (±0,11) with the found settings. Particle production can be adjusted by changing the grid or liquid concentration and amount. The cough flow profile i.e., the strength of it as well as rise-, on-, and fall-time of the cough are software adjustable. Maximum momentary peak flow velocity is close to 800 l/min. The exit velocity of a cough plume is 3,9 m/s and it reaches 3 m distance in 6,5 s. All these values fit among the literature found ones for human produced coughs. In addition to characterization test, a small measurement campaign with real surrogate virus was made. In campaign experiments it was found that applying the cough generator with a face mask reduced the exposure of a receiver to test virus aerosol particles at least 85 % compared to a reference measurement without masks, whereas by applying the receiver only with a mask had essentially no effect on its exposure.
-
(2023)Atmospheric aerosol particles play a significant role in urban air pollution, and understanding their size distribution is essential for assessing pollution sources and urban aerosol dynamics. In this study, we use a novel method developed by Kontkanen et al. (2020) to determine size-resolved particle number emissions in the particle size range of 3-800 nm at an urban background site and a street canyon site in Helsinki. Our results show overall higher particle number emissions in the street canyon compared to the urban background. On non-NPF event days, the particle number emissions of 3-6 nm particles in the urban background are highest in the noon. The emissions to the size range of 6-30 nm are highest during the morning or afternoon at both sites, indicating traffic is the main particle source in this size range. The emissions of larger particles are relatively low. Seasonal analysis suggests higher emissions during the summer in comparison to the winter which might be linked to higher product of mixing layer height (MLH) and particle number concentration in summer. Further investigations into particle emissions from different wind sectors suggest higher particle emissions from the urban sector than from the road sector in the urban background, contrary to the results for NOx concentrations. More research is needed to better understand the underlying factors. In addition, a comparison between particle number emissions estimated using FMI measurement MLH data and ERA5 model MLH data reveals that FMI data provides a more reliable representation of the MLH in the study area. Overall, the methods show limitations in accurately capturing particle dynamics in Helsinki. Future studies should address these limitations by employing more accurate NPF event classification and refining sector division methods.
-
(2019)Atmospheric aerosols affect the Earth's radiative balance, visibility and human health. Therefore the formation processes and growth of these particles are important and should be studied to understand how human and natural processes affects these processes. One poorly understood and relatively little studied part of aerosols is particulate organic nitrates (pONs). These pONs are mostly formed during nighttime when NOx, mainly emitted from fossil fuel combustion and industrial processes, and volatile organic compounds (VOCs), from both natural and anthropogenic sources, reacts in the atmosphere. The quantification of these pONs is still hard due to instrumental restrictions, although much improvement has happened during recent years. One main reason for these challenges is the difficulty to separate inorganic nitrates from organic nitrates with real-time instruments. During this work, we generated pure pON in well controlled laboratory conditions and sampled it with an Aerosol Mass Spectrometer (AMS), an instrument widely used for measuring the chemical composition of atmospheric aerosols. We used four different pON precursors to generate pON. I investigated the fragmentation patterns of pON detected by the AMS, utilizing the high resolution of the newest model of the AMS. As older versions of the AMS has difficulties to separate nitrate-containing organic fragments due to lower resolution than the AMS I used, I was able to study pON mass spectrum with better resolution than anyone before me. I found mass spectral differences for the different pON precursors, and was able to find unique fragments for some of the pON precursors that possibly can be used as marker fragments.
-
(2020)We investigated the impact of various parameters on new particle formation rates predicted for the sulfuric acid - ammonia system using cluster distribution dynamics simulations, in our case ACDC (Atmospheric Cluster Dynamics Code). The predicted particle formation rates increase significantly if rotational symmetry number of monomers (sulfuric acid and ammonia molecules, and bisulfate and ammonium ions) are considered in the simulation. On the other hand, inclusion of the rotational symmetry number of the clusters only changes the results slightly, and only in conditions where charged clusters dominate the particle formation rate because most of the clusters stable enough to participate in new particle formation display no symmetry, therefore have a rotational symmetry number of one, and the few exceptions to this rule are positively charged. Further, we tested the influence of the application of a quasi-harmonic correction for low-frequency vibrational modes. Generally, this decreases predicted new particle formation rates, and significantly alters the shape of the formation rate curve plotted against the sulfuric acid concentration. We found that the impact of the maximum size of the clusters explicitly included in the simulations depends on the simulated conditions and the errors due to the limited set of clusters simulated generally increase with temperature, and decrease with vapor concentrations. The boundary conditions for clusters that are counted as formed particles (outgrowing clusters) have only a small influence on the results, provided that the definition is chemically reasonable and the set of simulated clusters is sufficiently large. We compared predicted particle formation rates with experimental data measured at the CLOUD (Cosmics Leaving OUtdoor Droplets) chamber. A cluster distribution dynamics model shows improved agreement with experiments when using our new input data and the proposed combination of symmetry and quasi-harmonic corrections., compared to an earlier study based on older quantum chemical data.
-
(2023)The Differential Mobility Particle Sizer (DMPS) is a widely used instrument in the size distribution measurements of sub-micron aerosol particles. The particles are size classified based on their electrical equivalent diameter by a Differential Mobility Analyser (DMA) in the DMPS. Only charged particles can be measured with a DMPS. An aerosol charger is hence required since most ambient particles are neutral. An estimation of the size dependent charge distribution of the aerosol particles is required to reach a representative size distribution of the whole aerosol population from the raw measurement data. The charged fractions of the population are conventionally calculated by applying bipolar charging (i.e., an ion atmosphere including ions of both polarities charges aerosols by diffusion and ion attachment onto the particles) theories. Fixed charger ion properties have been used to derive approximation to these theories. The charger ion properties in ambient “real-world” measurements are, however, not fixed but proven to vary substantially. These variations may lead to significant differences when comparing to the approximations. A new method for aerosol charging that reduces the uncertainties that originate from unknown properties of the charger ions was tested in this thesis. The method consists of the introduction of a known trace compound (hereafter called doping) into the aerosol sample flow upstream of a bipolar charger. The effect of doping on charger ion mobility distribution was successfully tested in laboratory experiments. A possible enhancement of charging efficiencies of nanoparticles was studied. The charger ion doping was also tested in atmospheric measurements, where it showed an effect on charger ion properties.
-
(2023)This thesis investigates the impact of the energy crisis on air quality in the Po Valley, Italy, with a focus on the effect of changes in methane consumption over the potential changes in wood burning consumption. The study employs the WRF-CHIMERE model to simulate the consequences of varying wood burning consumption on air quality. Observational data of benzo[a]pyrene and PM2.5 concentrations in the Po Valley are also analyzed. The results indicate that meteorological conditions have a significant influence on air quality, overshadowing the potential effects of emission changes resulting from the energy crisis. However, we observed a model’s bias correlated to the planetary boundary layer height, which could have influenced this result. Further investigation is necessary to correct this bias and comprehensively understand the relationship between energy consumption, air quality, and meteorology in the Po Valley.
-
(2023)The Arctic is warming approximately four times as fast as the rest of the planet, and the current and future changes may have drastic effects on the entire globe. However, the detailed processes of the Arctic climate have been studied to a small extent due to the remote and hard-to-reach location, and the representation of the Arctic in climate models has been inadequate. There are many uncertainties in climate models, and significant uncertainties concern aerosol-related information. Atmospheric aerosols have a large, yet not entirely understood and quantified effect on the climate. Aerosols affect the Earth’s radiative balance by scattering and absorbing incoming radiation, and they play a significant role in the cloud formation process. In order to improve the representation of the Arctic in climate models and tackle the unsolved questions about the Arctic atmosphere, sea ice, ocean, biogeochemistry and ecosystem, a one-year-long expedition called Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) was conducted in the central Arctic between September 2019 and October 2020. As secondary aerosol formation (new particle formation) produces more than 50% of the atmospheric cloud condensation nuclei, and iodic acid has been identified to be a significant compound for new particle formation in the Arctic pristine environments, the iodic acid concentrations during the full-year MOSAiC expedition was investigated. The main research objective was to quantify the seasonal cycle of iodic acid in the Arctic. The correlation with temperature, solar radiation and ozone were also studied. Together with ice dynamics, sea ice thickness and air mass back trajectory simulations, the possible sources of measured iodic acid were investigated. The participation in forming new particles was also studied. The measured iodic acid concentrations varied between 1e4 and 4e7 molecules/cm3 with a detection limit of 1.22e5 molecules/cm3, and the concentrations were in the same range with measured earlier in the Arctic. The highest concentrations were measured in April. An increased correlation of iodic acid concentration with temperature and radiation was observed during spring, and an anticorrelating trend was observed between iodic acid concentration and ozone during the period of high iodic acid, implying that iodic acid is partially responsible for ozone depletion in the arctic. Comparison with particle data showed that iodic acid concentrations measured during MOSAiC were sufficient to take part in the new particle formation. However, nucleation was not observed during the highest iodic acid concentration period in April.
-
(2023)After 2013, the environmental protection department in China has significantly reduced on-road emission through the upgrade of emission standards, the improvement of fuel quality and economic tools. However, the specific effect of the control policies on emission and air quality is still difficult to quantify. This is mainly due to the data shortage on vehicle emission factors and vehicle activities. In this research, we developed the 2008-2018 on-road emissions inventory based on Emission Inventory Preparation Guide (GEI) and existing vehicle activity database. Our estimates suggest that CO and PM2.5 showed a relatively significant decrease, by 66.2% and 58.8%. However, the trend of NOx (5.8%) and NMVOC (-4.8%) was relatively stable. The Beijing-Tianjin-Hebei (BTH), Yangtze River Delta (YRD), Pearl River Delta (PRD) and Sichuan Basin (SCB) regions all showed a uniform trend especially in NOx. For Beijing-Tianjin-Hebei, the significant decline in NOx might be caused by earlier implementations in emission standard and fuel quality. In addition to this, we designed additional evaporation emission scenarios to verify the application of GEI in quantify emission impact on secondary pollutant (PM2.5 and O3). The results indicate that evaporation emission contributed to Maximum Daily Average 8-hour (MDA8) O3 concentration by about 3.5%, for Beijing, Shanghai and Nanjing. This value can reach up to 5.9%, 5.3% and 7.3%, but the impact on PM2.5is extremely limited. Our results indicate the feasibility of GEI in improving and lowering the technical barrier of on-road emission inventory establishment at the same time and its further application in quantifying on-road emission contribution to air quality. Besides that, it shows a strong potential in on-road policy environmental assessment and short-term air quality assessment.
-
(2023)Ozone, an important and ubiquitous trace gas, protects lives from harm of solar ultraviolet (UV) radiation in the stratosphere but behaves as a toxic compound in the troposphere to living organisms. Also, tropospheric ozone is a vital oxidant or source of daytime oxidant (i.e., OH radical) for e.g., different volatile organic compounds (VOCs). Affecting global radiation balance directly or indirectly by acting as cloud condensation nuclei and having negative impact to human health, aerosols are widely studied for over a century. Highly oxygenated organic molecules (HOM) were proved to be a large source of secondary organic aerosol (SOA) and their oxidation formation pathways from VOCs can also trigger the production of ozone once involving NOx (=NO+NO2) and UV light. The highly nonlinear relationship among ozone, NOx, and VOCs (O3-NOx-VOC sensitivity or O3 formation sensitivity) has been researched since last century. The complex system was recently reflected during COVID-19 lockdowns: reduction of NOx increased the ozone production. This is because the system was in VOC-limited regime, where reducing VOCs is the most efficient way to reduce O3. However, the determination of O3 formation regimes (either VOC-limited or NOx-limited) is challenging in different environmental conditions. The intrinsic connection between HOM and O3 formation provide a new insight: the proportions of VOCs and NOx not only affect the O3 formation regimes but also impact the distribution of HOM species. Therefore, in this study, we try to unveil the indicating role of HOM species on the O3 formation sensitivity by chamber experimental works with a nitrate chemical ionization mass spectrometer (CI-APi-TOF) and gas monitors. Injected NOx and VOCs step by step, the experiments were designed to make the atmosphere-mimicking system change between those two regimes. The ratio between HOM-dimers and HOM organic nitrate monomers was selected as the indicator for O3 formation sensitivity due to their closely connected chemical reactions, involving peroxy radicals. Furthermore, a simple box model was developed for simulating chamber results and obtaining O3 isopleths to visually show the O3 formation regimes. Through experimental and model results, it can be inferred that ratios below 0.2 consistently correspond to the VOC-limited regime, whereas ratios above 0.5 consistently correspond to the NOx-limited regime. This study demonstrates that the ratio based on HOM species could additionally indicate the O3 formation sensitivity of ambient air when we use CI-APi-TOF to investigate the chemical compounds and aerosol formation, helping to elaborate the O3 pollution in the real troposphere.
-
(2020)The impacts of dust aerosols on human health and climate change are increasing as the particulate matter (PM) mass concentrations and frequency of Sand and Dust Storm (SDS) episodes have shown an increasing trend in recent studies, especially for the Middle East and North Africa (MENA). In this thesis, particulate matter (PM10 and PM2.5) concentrations were measured during May 2018–March 2019 in the urban atmosphere of Amman, Jordan. The PM sampling was 24-hours every 6 days. The overall mean PM10 mass concentration was 64±39 μg/m3 with the median (+interquartile range) value of 49.2+53.5 μg/m3, the PM2.5 mass concentration varied between 15 μg/m3 and 190 μg/m3 with an annual average 47±32 μg/m3 and with the median (+interquartile range) value of 35.8+26.3 μg/m3. The PM2.5 / PM10 ratio was 0.8±0.2. According to the Jordanian Air Quality standards, the annual mean PM10 needs to be below a limit value of 120 μg/m3, which was true in this work. However, the PM2.5 mass concentration was three times higher the corresponding limit value (65 μg/m3). However, both exceeded the World Health Organization (WHO) air quality annual guideline of 20 μg/m3 for PM10 and 10 μg/m3 for PM2.5. The results show that the observed PM10 mass concentrations in Jordan were lower than what was reported in other cities in the Middle East but were higher when compared to other Mediterranean cities. During the measurement period, Jordan was affected by Sand and Dust Storms (SDS), which were observed on 14 sampling days. The source origins of these SDS were traced back to North Africa, the Arabian Peninsula, and the Levant. The 24-hour PM10 concentrations during these SDS episodes ranged between 108.1 μg/m3 and 187.3 μg/m3. In the future, measurements with a higher time resolution (one sample per day) are recommended for a more precise seasonal trend interpretation.
-
(2020)Sand and dust storms are one of the major regional environmental problems that affect human health. Many environmental studies have focused on airborne dust concentrations observed at different regions and have tried to connect the observations to specific dust source regions. This thesis aims to provide a new dust classifications scheme for the Eastern Mediterranean region, specifically observed in Amman, Jordan. I utilized a combination of a long-term data-base consisting of aerosol particle number concentration in coarse mode (1–10 µm) during November 2013 – July 2018 and air mass back trajectories analysis to visually identify the Sand and Dust Storm (SDS) episodes. The classification included three main source regions of for the submicron dust, namely Sahara, Arabia, and Levant. I also classified the data according to the, episode intensity according to their corresponding number concentrations as no-dust, mild, intermediate, and strong intensities and further classified the range of back trajectories as short, intermediate, long, and very long, which indicates the distance between the observation site and the source region.. The results showed that majority of the dust events and an elevated number of dust days are influenced by a source in Levant and Sahara source region. These events which dominated during 70 days in 2016. The Levant source governed during 60 days during the same period. Other dust sources contributed less to the dusty days, and the lowest dusty days number was due to emissions from Levant & Arabia (19 days). The episode intensity varied censurably and underlined variability from the different source areas. The maximum intensity in the dust episode concentration was linked to Levant & Sahara with a max number concentration of 95 /cm3. The classification method was successful and it was able to establish a dust source database in the Eastern Mediterranean region based on the long-term observations performed in Amman with variable dust concentration and dust periods in different seasons and different meteorological circumstances.
-
(2021)Cloud condensation nuclei (CCN) participate in controlling the climate, and a better understading of their number concentrations is needed to constrain the current uncertainties in Earth’s energy budget. However, estimating the global CCN concentrations is difficult using only localised in-situ measurements. To overcome this, different proxies and parametrisations for CCN have been developed. In this thesis, accumulation mode particles were used as a substitute for CCN, and continental proxy for number concentration of N100 was developed with CO and temperature as tracers for anthropogenic and biogenic emissions. The data utilised in the analysis contained N100 measurements from 22 sites from 5 different continents as well as CO and temperature from CAMS reanalysis dataset. The thesis aimed to construct a global continental proxy. In addition to this, individual proxies for each site (the site proxy) and proxies trained with other sites’ data (the site excluded proxy) were developed. The performance of these proxies was evaluated using a modified version of K-fold cross-validation, which allowed estimating the effect of dataset selection on the results. Additionally, time series, seasonal variation, and parameter distributions for developed proxies were analysed and findings compared against known characteristics of the sites. Global proxy was developed, but no single set of parameters, that would achieve the best performance at all sites, was found. Therefore, two versions of global proxy were selected and their results analysed. For most of the sites, the site proxy performed better than the global proxies. Additionally, based on the analysis from the site excluded proxy, extrapolating the global proxy to new locations produced results with varying accuracy. Best results came from sites with low concentrations and occasional anthropogenic transport episodes. Additionally, some European rural sites performed well, whereas in mountainous sites the proxy struggled. Comparing the proxy to literature, it performed generally less well or similarly as proxies from other studies. Longer datasets and additional measurement sites could improve the proxy performance.
-
(2019)Observations of frequent new particle formation events have been made in severely polluted environ- ments in China. In theory this should not be possible because of the large condensation sink caused by large concentrations of particles. This thesis tries to shed light on reasons why this happens by investigating heterogeneous nucleation in different conditions, for different vapours and seed particles. Especially of interest are those situations where heterogeneous nucleation is considered to be ineffective which would affect the condensation sink of vapours. Theoretical modelling was used to investigate heterogeneous nucleation and measured data was analyzed to complement theoretical results. In this thesis, special focus is on contact angle θ of heterogeneous nucleation, a variable that depends on surface tensions of the vapour and the seed particle the vapour condenses on. θ has a strong effect on the heterogeneous nucleation probability and the larger it is the less likely nucleation is to occur. Many situations where there was at least in theory little heterogeneous nucleation were found. Conditions similar to real atmospheric conditions were investigated and contact angles needed for heterogeneous nucleation to be ineffective for a vapour were determined. Because θ is related to chemical properties of the seed particle, aerosol chemical composition was also investigated alongside with the corresponding condensation sink and particle formation rates using data measured in Beijing, China. This was done in hopes of finding indications of if and how effective condensation sink and aerosol chemical composition are related. However, no clear connection was yet found. Influence of ineffective heterogeneous nucleation on effective condensation sink was considered. It was found that if ineffectiveness of heterogeneous nucleation affects the condensation sink, effective sink can in theory be significantly smaller than condensation sink. Thus, ineffective heterogeneous nucleation due to multiple factors explored in this thesis could in part explain why new particle formation events are observed even in heavily polluted areas.
-
(2020)Atmospheric aerosol particles affect Earth’s radiation balance, human health and visibility. Secondary organic aerosol (SOA) contributes a significant fraction to the total atmospheric organic aerosol, and thus plays an important role in climate change. SOA is formed through oxidation of volatile organic compounds (VOCs) and it consists of many individual organic compounds with varying properties. The oxidation products of VOCs include highly oxygenated organic molecules (HOM) that are estimated to explain a large fraction of SOA formation. To estimate the climate impacts of SOA it is essential to understand its properties in the atmosphere. In this thesis, a method to investigate thermally induced evaporation of organic aerosol was developed. SOA particles were generated in a flow tube from alpha-pinene ozonolysis and then directed into a heated tube to initiate particle evaporation. The size distribution of the particles was measured with parallel identification of the evaporated HOM. This method was capable of providing information of SOA evaporation behaviour and the particle-phase composition at different temperatures. Mass spectra of the evaporated HOM and particle size distribution data were analyzed. The obtained results suggest that SOA contains compounds with a wide range of volatilities, including HOM monomers, dimers and trimers. The volatility behaviour of the particulate HOM and their contribution to SOA particle mass was studied. Furthermore, indications of particle-phase reactions occurring in SOA were found.
Now showing items 1-18 of 18