Skip to main content
Login | Suomeksi | På svenska | In English

Browsing by master's degree program "Metsätieteiden maisteriohjelma"

Sort by: Order: Results:

  • Lemström, Emil (2023)
    Tiivistelmä * Referat * Abstract Kasvava kysyntä uusiutuvalle energialle on ajanut Suomen energiasektoria yhä enemmän hyödyntämään biopohjaisia raaka-aineita, kuten kiinteitä puupolttoaineita energiantuotannossa. Asetettujen ympäristötavoitteiden saavuttamiseksi on ensiarvoisen tärkeää, että energia tuotetaan kestävästi ja resurssitehokkaasti mahdollisimman vähäisin ilmastovaikutuksin. Kaskadikäyttöperiaate on osa EU:n uusiutuvan energian direktiiviä (RED), joka tavoittelee kestävämpiä energiaratkaisuja kaikilla EU:n talouden aloilla. Kasvava tarve uusiutuvalle energialle ja fossiilisten raaka-aineiden korvaamiselle luovat kestävyyttä ajatellen tarpeen selvittää, missä määrin Suomen kiinteän puupolttoaineen raaka-ainemarkkinat noudattavat kaskadikäyttöperiaatetta. Tutkielma keskittyy selvittämään, päätyykö aineskelpoista puuraaka-ainetta energiatuotantoon korkeamman jalostusasteen sijaan ja mitkä tekijät vaikuttavat puuraaka-aineen ohjautumiseen polttoaineeksi. Hypoteesina oli, että appropriate fit -periaate, joka edellyttää laadukkaimpien resurssien hyödyntämistä ensisijaisesti kaikkein vaativimpaan käyttöön, ei kaikilta osin toteudu Suomen nykyisillä kiinteän puupolttoaineen teollisilla raaka-ainemarkkinoilla. Hypoteesiin liittyy epäilys kiinteitä puupolttoaineita koskevan tilastoinnin paikkansapitävyydestä, joka on osaltaan mahdollistanut aineskelpoisen puuraaka-aineen energiakäyttöä. Tutkielma yhdistelee tilastollista vertailua ja asiantuntijahaastatteluihin nojaavaa laadullista analyysia. Tulokset osoittavat, että kiinteän puupolttoaineen teolliset raaka-ainemarkkinat noudattavat pääosin kaskadikäyttöperiaatetta, mutta yksittäisten poikkeamien todennäköisyyttä pidettiin mahdollisena puuraaka-aineen markkinaehtoisen ohjautumisen myötä. Yksittäisten poikkeamien lisäksi esiintyy kuitenkin alueellisesti jopa systemaattisia eroavaisuuksia siinä, missä määrin kiinteät puupolttoainemarkkinat noudattavat kaskadikäyttöperiaatetta. Lukuisten markkina-alueiden sekä metsäteollisuuden, suhteessa energiantuotantoon, maantieteellisesti epätasaisen jakautuneisuuden vuoksi, esiintyy Etelä-Suomessa ja rannikolla epätasapaino kiinteän puupolttoaineen tarjonnan ja kysynnän välillä. Puuraaka-aineen kysyntä on kasvanut sekä metsä- että energiateollisuuden parissa. Kasvavan kysynnän odotettiin lisäävän myös jalostuskelpoisen puuraaka-aineen energiankäyttöä erityisesti edellä mainituilla alueilla, joilla esimerkiksi metsähaketase on jopa nykyisellään alijäämäinen. Kiinteän puupolttoaineen tilastoinnin osalta tilastoviranomaisten julkaisut koettiin luotettaviksi ja tarkastelukin osoitti tilastoinnin olevan luotettavaa pääpuupolttoaineluokkatasolla. Tutkielman tulokset vahvistavat kuitenkin hypoteesia ja tunnistivat tarpeen kehittää runkopuuhakkeen laatua koskevan tilastoinnin luotettavuutta ja tarkkuutta. Etenkin runkopuuhakkeen jakautumisessa pienpuuhun ja järeään puuhun, esiintyy tilastoinnissa enemmän epävarmuustekijöitä, eikä teknistä tilastointiharhan mahdollisuutta voida poissulkea aines- ja energiapuun kulutuksen välillä.
  • Rajajärvi, Jimi (2020)
    Suomessa harvennetaan vuosittain yli 500 000 hehtaaria metsää. Harvennusten tarkoituksena on taloudellisen tuoton lisäksi turvata kasvamaan jätettyjen puiden terveys sekä elinvoimaisuus, jolloin puiden järeytyminen tukkipuiksi on mahdollista. Olennainen tekijä jäljelle jäävän puuston kasvuun on hyvin onnistunut korjuu, eli hyvä korjuujälki. Korjuujäljestä etenkin ajouratunnuksilla on puiden kasvun kannalta suuri merkitys, sillä ensiharvennuksilla muodostettuja uria tullaan usein käyttämään myöhemmissä harvennuksissa uudistushakkuuseen saakka. Hyvin muodostetun ajouraverkoston pinta-ala kattaa noin viidenneksen koko harvennettavasta alueesta, joten yksikin ylimääräinen tai liian leveä ajoura kasvattaa varhaisessa vaiheessa hakatun alan osuutta aiheuttaen kasvutappiota ja taloudellisen menetyksen verrattuna optimitilanteeseen. Tämän lisäksi urien syvät painumat vaurioittavat jäljelle jäävän puuston juuria aiheuttaen korkean laho- ja tautiriskin. Ajouratunnusten seurantaa toteutetaan korjuujälkitarkastusten yhteydessä koealaluontaisesti. Vaikkakin teoriassa koealojen sijoittelu on systemaattista sekä korjuujäljen kriteerit mittaajilla samat, usein mittaustuloksissa on eri mittaajien välillä huomattavissa eroa. Lisäksi viivamainen koeala-asettelu saattaa tuottaa vain yhden mittauksen eniten käytössä olleelta kokoojauralta, jolloin suurimmat painumat jäävät helposti huomioimatta. Koealoilta saadut numerot eivät myöskään kerro, missä kohdassa vaurioita on syntynyt ja miten niitä olisi voitu välttää. Ratkaisuna ajouraverkoston laajamittaiseen tarkasteluun on hyödyntää viimeisen vuosikymmenen aikana nopeassa kehityksessä olevaa drone-kalustoa. Tiheästi ilmasta käsin otetuista kuvista muodostettu fotogrammetrinen pistepilvi on alhaisten kustannustensa ansioista tehokas ja nopea tapa saada kattavaa aineistoa alueen ajouraverkoston tunnuksista. Etenkin tarkaksi osoittautunut X ja Y-akselin mittaustarkkuus antaa desimetrin tarkan tiedon ajouraväleistä sekä visuaalisesti hyödynnettävissä oleva Z-akseli tarjoaa syvimpien ajourapainumien sijainnit. Perinteisten ajouratunnusten lisäksi voidaan myös mitata ajouran kokonaispituus ja tarkastella harventamatta jääneitä alueita hakkuukoneen puomin teoreettisen ulottuman ylittäviltä alueilta . Menetelmää voidaan hyödyntää numeerisen tarkastelun lisäksi visuaalisesti osoittamalla metsänomistajalle tai korjuuyrittäjälle ongelmakohdat kattavasti ilman tarkastuksen jälkeistä erillistä maastokäyntiä. Ajouraverkostokartalta nähdään nopeasti koko alueen ajourapainumat, -välit, ajouraverkoston asettelu sekä mahdolliset harventamatta jääneet alueet. Tämän lisäksi erityisen ongelmalliselle alueelle voidaan suunnitella pistepilveltä tarvittavat korjaustoimenpiteet. Ongelmana menetelmässä on kuitenkin vähäinen pisteiden lukumäärä latvuksen peittämistä rungoista, mikä ai-heuttaa ongelmia ajouran leveyden mittauksessa. Toimiva menetelmä ajouran leveyden mittaukseen voidaan kehittää, mutta sitä voidaan käyttää vasta, kun kuva /laserkeilausaineistoa aletaan tuottaa korjuussa käytetyistä koneista maanpinnan tasolta. Parhaassa tapauksessa pistepilvien tarkastelu voi kehittää tulevaisuuden puunkorjuuta palautteen perusteella kohti parempaa korjuujälkeä ja näin säästää luontoa sekä kustannuksia tehden korjuusta entistäkin tehokkaampaa. Tämä tutkimus toimi pioneeritutkimuksena Stora Ensolle fotogrammetrisen pistepilven kuvauksessa, tuottamisessa sekä käsittelyssä.
  • Nyström, Maria (2021)
    Alueellisen PEFC-ryhmäsertifioinnin piirissä on valtaosa Suomen yksityismetsistä ja se on ollut pääasiallinen metsäsertifioinnin toteutustapa Suomessa vuosina 1999-2020. Suomessa järjestelmä perustuu siihen, että metsänomistajien lisäksi metsänomistajille ja metsään palveluita tarjoavat tahot ovat sitoutuneet noudattamaan toi-minnassaan PEFC-vaatimuksia ja vastaavat näin merkittäviltä osin vaatimusten toteutumisesta. Tämän työn tavoitteena on tarkastella alueellisen PEFC-ryhmäsertifioinnin toteutusta ko. aikajaksona ja tulevaisuuden kehitystä laadullisin menetelmin. Työssä kuvataan ensin järjestelmä, jolla sertifiointia käytännössä toteutetaan ja tuotetaan tietoa vaatimusten toteutumisesta riittävällä tasolla PEFC FI 1002 -metsäsertifioinnin- kuin PEFC FI 1001 -ryhmäsertifioinnin standardiin nähden. Järjestelmä kuvataan niin, että saadaan kokonaisymmärrys tämänhetkisestä sertifioinnin toteutuksesta. Tämän jälkeen kuvataan ISO 9001:2015 –standardi, missä esitetään laadunhallinnan keskeiset käsitteet ja periaatteet, jolla organisaatio voi varmistaa, että sen toimintajärjestelmä vastaa sille asetettuja vaatimuksia. Aikajakson 1999-2020 poikkeamia tarkastellessa tulivat esille kriteerit, joihin tulee kiinnittää jatkossakin erityistä huomiota pyrittäessä jatkuvaan parantamiseen. Sosiaalisten, työn tekemiseen liittyvien kriteereiden huomioiminen on edistynyt sertifiointikausien aikana, mutta kriteerit ovat edelleen säännöllisesti poikkeamien kohteena. Puutteet vesiensuojeluun kohdistuvissa toimenpiteissä ovat myös esiintyneet poikkeamina säännöllisesti. Valmisteilla olevat uudet PEFC ST 2018 –sertifioinnin edellyttämät muutokset lisäävät järjestelmän tuottaman tiedon uskottavuutta. Jatkossa toiminnan läpinäkyvyys pitää pystyä osoittamaan entistä tarkemmin. Toteuttamalla laadunhallintaa ISO-9001:2015 standardin mukaisesti vastaa toiminta kansainvälisesti hyväksyttyä tasoa, jossa toimintaa tarkastellaan kokonaisuutena toisiinsa linkittyvinä asioina ja toiminnalle on olemassa selkeä rakenne. Tarkastelua voidaan myös hyödyntää uuden PEFC FI 1001:20xx -standardin edellyttämän jatkomäärittelyn tukena. Tämä työ tarjoaa hyvän lähtökohdan uuden toimintamallin laadinnalle ja auttaa sitomaan uudet toiminnot yhtenäiseksi kokonaisuudeksi. Järjestelmään kohdistuvat vaatimukset parantavat toiminnan laatua siten, että toimintaa seurataan kattavammin ja se antaa työkaluja siihen, että ei-toivottuun toimintaan voidaan paremmin puuttua. Työn tuloksena on kattava kuvaus alueellisen PEFC-ryhmäsertifioinnin toteutuksesta ja näkemyksiä toiminnan kehittämiseksi. Työ voi osaltaan toimia oppaana PEFC-sertifioinnin käytäntöihin perehtymisessä ja pohjana, kun luodaan osin ISO 9001:2015 –standardiin perustuvaa uutta toimintamallia PEFC-standardien päivittyessä.
  • Åman, Tommy (2024)
    Bakgrunden till studien är den ökade medvetenheten kring hållbarhet och ansvarsfullhet, vilket har resulterat i olika former av offentlig styrning såsom lagar, direktiv, rekommendationer, certifikat, normer och standarder. I fokus för denna studie står Corporate Sustainability Reporting Directive (CSRD), som specifikt riktar sig till stora aktörer. Studien undersöker små- och medelstora företag (SME) som verkar inom leveranskedjan för stora skogsbolag med fokus på virkesanskaffning och skogsvård. Dessa SME-företag löper en potentiell risk att omfattas av krav på ansvarsfullhets- och hållbarhetsåtgärder i och med att de ingår i en leveranskedja som ska uppfylla de stora bolagens kriterier. För att utforska SME-företagens ståndpunkter genomfördes semi-strukturerade telefonintervjuer. Respondenterna tillhörde något eller flera av de tre stora skogsbolagens leveranskedja, nämligen Stora Enso Oyj, Metsä Group och UPM Kymmene Oyj, och utförde skogsvårdstjänster, virkesdrivning och logistik åt skogsbolagen. I intervjuerna identifierades olika teman som var kopplade till respondenternas ståndpunkter, vilka framkom i flera intervjuer. Tematiska analysen utfördes med programvaran ATLAS.ti. Studien rättfärdigades genom en analys av relevanta aspekter från skogsbolagens årsrapporter, vilket också användes som bakgrund till formuleringen av intervjufrågorna. Samtliga årsrapporter innehöll information om bolagens CSRD-strategi och andra initiativ för ansvarsfullhet och hållbarhet, även med avseende på leveranskedjan. Resultaten av studien visade att samtliga respondenter påverkades av skogsbolagens ansvarsfullhetsåtgärder och dessutom frivilligt genomförde ansvarsfullhetsåtgärder. Åtgärderna delades in i ekologiska, sociala och förvaltningsmässiga åtgärder, där de ekologiska och sociala var vanligast förekommande. Exempel på åtgärder inkluderade utredning av koldioxidavtryck, efterlevnad av olika frivilliga miljöcertifieringar, förbättring av anställdas arbetshälsovård utöver lagkrav samt frivillig efterlevnad av CSRD-direktivet. Studien ger klara indikationer på att SME-företagen i finska skogsbolagens leveranskedja har integrerat ansvarsfullhet i sina verksamheter och strategier.
  • Papunen, Saija (2022)
    Measuring the effectiveness of protected areas (PAs) is essential as they are key tools in tackling the ongoing biodiversity loss and there is substantial variation in their effectiveness (the estimated ability of protected areas to prevent unnatural disturbances). In forested PAs, the most common variable in effectiveness estimation is forest loss, but fire can also be used as a proxy for conversion. There is, however, a lack of robust comparisons between different data sets and proxies. This thesis aims to provide more insight into the issue by comparing three satellite-based data sets in protected area effectiveness assessment using Madagascar as a case study. The questions to be answered here are whether the data sets and variables derived from them produce similar PA effectiveness estimates and whether they could be used interchangeably in research and for practical management purposes. The hypotheses are as follows: H1: The three proxies produce similar results with the two fire proxies most likely having a stronger relationship. H2: The data sets can be used interchangeably both for science purposes and in practical management of PAs. The effectiveness of Malagasy protected areas established in or before 2005 (N=42) was examined from 2005 to 2017. Three binary response variables were compared: forest loss, fire incidence, and burned area. In addition, a continuous forest loss variable was examined. Forested areas and the full landscape were studied separately i.e. estimates were produced for both forested areas only and full landscape (forested areas + other areas). 1-kilometre parcels in a uniform grid were sampled using nearest neighbour Mahalanobis distance matching, controlling for the factors affecting conversion pressures with appropriate covariates: altitude, slope, distance to cities, distance to roads, distance to waterways, and rainfall for forested areas and full landscape, and in addition, distance to forest edge for forested areas. Relative effect, pooled relative effect, and network relative effect were calculated for the binary variables, mean effect for the continuous variable. The effects were calculated on country level, biome level (tropical and subtropical moist broadleaved forests, tropical and subtropical dry broadleaved forests, and deserts and xeric shrublands), and individual PA level. Protected areas appeared to be at least moderately effective, and all variables produced parallel, consistent results on the country and biome level, especially when using pooled relative effect. On average, PAs in tropical and subtropical moist broadleaf forests were most effective in avoiding land-use pressures, the ones in tropical and subtropical dry broadleaf forests slightly less, and the ones in deserts and xeric shrublands most ineffective. There was substantial variation between and inside individual PAs, and in approximately half of the PAs all variables indicate that the given area is significantly effective (α = 0,05). In a little over half of the PAs the effects were mixed, and in forested areas, no PA was indicated to be ineffective by all variables. In full landscape, this was the case for one PA. There were small differences between forested areas and the full landscape in all levels, but they were statistically significant only in a few cases. This study thus suggests that the data sets could be used interchangeably, at least on country and biome level, when conducting matching to assess PA effectiveness in a tropical setting. They could be utilised on individual PA level, too, with certain precautions and understanding of the nature and behaviour of the data. They are well suited for research; however, in practical management forest loss and fire incidence might be more feasible than burned area, due to its certain characteristics (it for example demands quite a lot of processing depending on the use purpose) and accessibility issues.
  • Kotanen, Janne (2021)
    Pesäpredaatio eli pesien ryöstely kuuluu luontaisena osana peto–saalis vuorovaikutukseen. Se ohjaa lintujen elinkiertojen evoluutiossa muun muassa pesäpaikan valintaa, munamäärää, pesäpoikasajan pituutta sekä monia muita tekijöitä, jotka vaikuttavat lisääntymismenestykseen. Riistakameroiden avulla pystytään luotettavasti tutkimaan, mitkä eläimet pesiä predatoivat, kun taas aiemmissa menetelmissä pesän ryöstäjä on yleensä jäänyt epäselväksi. Maassa pesivien lintujen, kuten metsäkanalintujen, pesä on alttiina niin maa- kuin lintupedoille. Yleisesti on tiedossa, että suuret hakkuualat elättävät suuremman määrän jyrsijöitä, jolloin ne voivat elättää myös suuremman määrän petoja. Aiemmissa tutkimuksissa on todettu, että predaatio on suurinta reuna-alueella. Reunavaikutus syntyy, kun osa predaattoreista käyttää esimerkiksi hakkuuaukkoa ja osa metsää saalistusalueenaan, mutta näiden kahden rajapinnalla, reunavaikutusalueella, oleva pesä altistuu molemmille predaattoreille yhtenäistä metsää tai avointa aluetta herkemmin. Tutkimukseni käsittelee metsäkanalintujen pesäpredaatiota erikokoisissa hakkuuaukoissa ja niiden ympärillä metsän puolella. Tutkimus on osa Helsingin yliopiston Kosteikkoekologian ryhmän pesäpredaatiohanketta, jossa selvitetään pesien predaatioriskiin liittyviä tekijöitä erilaisissa ympäristöissä. Tässä työssä tutkitaan koepesien ja riistakameroiden avulla pesiä ryöstäviä petoja ja mitkä tekijät uudistusalojen koossa tai sijainnissa suhteessa erilaisiin ympäristömuuttujiin, kuten sähkölinjoihin ja metsäteihin, mahdollisesti altistavat pesiä predaatiolle. Tutkimuksesta saatavien tulosten avulla voidaan mahdollisesti tulevaisuudessa minimoida avohakkuualueita suunniteltaessa maassa pesivien lintujen, kuten metsäkanalintujen, pesäpredaatioriskiä. Tutkimuksen aineiston keräys toteutettiin Metsähallituksen omistamilla maa-alueilla kaukana asutuksesta, joten voitiin olettaa, että pesät saavat olla rauhassa ihmisiltä. Tutkimuksessa mukana olevat kohteet sijaitsivat Suomenselällä, Etelä-Pohjanmaan ja Keski-Suomen maakunnissa. Tutkimuksessa käytettiin fasaanin (Phasianus colchius) munia, joita laitettiin neljä kappaletta yhteen pesään. Pesät tehtiin maahan luonnollisen kaltaiseen pesimäpaikkaan siten, että kullakin koealalla yksi pesä oli hakkuuaukossa, toinen aukon ja metsän reunalla ja kolmas metsässä noin sadan metrin päässä aukon reunasta. Jokaisella pesällä oli riistakamera kuvaamassa pesää viikon ajan. Kaikkiaan koealueita oli 52, joista kussakin sekä aukossa, reunalla ja metsässä oli yksi pesä (koepesiä yhteensä 156). Aineiston analysoimiseen käytettiin R-ohjelmistoa. Ajankohdan vaikutuksen mallintamiseen käytettiin yleistettyä lineaarista mallia (GLM; Generalised linear model), selviytymisanalyysi tehtiin binaarisen logistisen regression avulla ja ympäristöanalyysiin käytettiin yleistettyjä lineaarisia sekamalleja (GLMM; Generalised linear mixed model). Aineistoa analysoitaessa uudistusalat luokiteltiin pinta-alan mukaan kuuteen luokkaan, jotka ovat 0,1-2,0 ha, 2,1-4,0 ha, 4,1-6,0 ha, 6,1-10,0 ha, 10,1-15,0 ha ja >15,1 ha. Pienin mukana oleva hakkuuaukko oli 0,3 ha. Tutkimus osoittaa, että nisäkäspedot eivät ole karuilla laajoilla metsäalueilla suurena uhkana metsäkanalintujen pesinnälle. Sen sijaan toiset linnut ovat, sillä korppi (Corvus corax), talitiainen (Parus major), närhi (Garrulus glandarius) ja käpytikka (Dendrocopos major) olivat eniten pesiä ryöstäneitä lajeja. Nisäkäspedoista pesiä tuhosi kettu (Vulpes vulpes) ja hirvi (Alces alces). Hieman yllättävää oli, että supikoira (Nyctereutes procyonoides) ei tuhonnut ainuttakaan pesää. Supikoira on ollut yleisin pesien saalistaja monissa rehevimmissä ympäristöissä tehdyissä kokeissa, joten tulokseni viitannee supikoiran olevan yleisesti ajateltua harvalukuisampi karuilla laajoilla metsäalueilla. Pesiä ryöstettiin lukumääräisesti eniten aukossa ja reuna-alueella ja vähiten metsässä. Analyyseissä pesien selviytymiseen vaikutti eniten 250 metrin säteellä pesästä olevat tiet ja sähkölinjat. Analyysien perusteella pesän etäisyys reunaan selittää yhtä hyvin pesän kohtaloa metsäisessä ympäristössä kuin se, millaista ympäristöä 250 metrin säteellä pesästä on. Aukon koolla ei suoranaisesti ollut merkitystä pesän selviytymiseen. Pesän selviytymisto-dennäköisyys oli yli 99 % ensimmäisenä ja seitsemäntenä koevuorokautena, joten ajallakaan ei ollut vaikutusta pesän selviytymiseen syrjäisellä metsäalueella. Matalan pesäpredaation tulokset viittaavat, että yksittäisen pesän löytämisen todennäköisyys ei ole kovin suuri, kun kyseessä on syrjäinen, kaukana asutuksesta oleva yhtenäinen metsäalue, vaikka se on tavanomaisten metsänhoitotoimien kohteena.
  • Seppälä, Pyry (2020)
    Raakapuun autokuljetus edustaa merkittävää kaukokuljetusmuotoa teollisuuden ainespuulogistiikassa, sillä autokuljetus edustaa noin 98,5 % kaikista metsäteollisuuden raakapuun kaukokuljetuksista. Teollisuuden ainespuun autokuljetustoiminta on suurien haasteiden edessä, sillä toiminnan korkeat tehokkuusvaatimukset, pula ammattitaitoisista kuljettajista sekä rapautuva tieverkko pakottavat etsimään uusia ratkaisuja toiminnan jatkuvuuden ylläpitämiseksi. Automaatiolla on arveltu olevan mahdollisuus paran-taa ainakin tehokkuutta, sillä ihmisen oman toiminnan tehokkuutta on vaikea enää parantaa. Tässä tutkimuksessa selvitettiin automaatiolla tavoiteltavia hyötyjä ainespuun eli pyöreän kuorellisen raakapuun sekä sivutuote-hakkeen (sahahake) autokuljetusketjuissa, ainespuun autokuljetusketjujen automaation kehitysnäkymiä sekä automaation haas-teita ja kehitystarpeita ainespuun autokuljetustoiminnan toimintaympäristössä. Tarkastelu kohdistui pääasiassa ainespuun kuljetus-ajoneuvoihin sekä puutavaranostureihin, mutta jonkin verran myös ainespuun tehdasvastaanotto- ja purkutoimintoihin. Automaati-olla tavoiteltavia hyötyjä tarkastellaan erikseen tehokkuuden, kustannusten, turvallisuuden, ympäristövaikutusten sekä kuljettajien työssä viihtyvyyden ja kuljettajatyövoiman saatavuuden suhteen. Tutkimus perustui kirjallisuuskatsaukseen sekä teemahaastatte-luihin. Kirjallisuuskatsauksen painottuessa yleisemmin tieliikenteen automaatioon, syvennettiin tietoutta ainespuun autokuljetusket-jun automaatiosta teemahaastatteluilla, joissa haastateltiin 18 asiantuntijaa, jotka edustivat erilaisia suhteita ainespuun autokulje-tustoiminnan automaatioon. Kirjallisuuskatsauksen rooli tässä tutkimuksessa oli teoriaohjaava, eli se ohjasi haastattelututkimusta ja tulosten tulkintaa. Kirjallisuuskatsaus ei toiminut hypoteesina eli haastattelututkimuksella ei pyritty testaamaan kirjallisuudessa esitettyjä teorioita. Ainespuun autokuljetus ja eritoten raakapuun autokuljetus, joka suuntautuu tienvarsivarastolta tehtaalle, edustaa aivan ääriesi-merkkiä tieliikenteen automaatiosta. Raskaan liikenteen automaation pääpainopiste on maanteille suuntautuvassa kappaletavara-liikenteessä. Maanteillä olosuhteet automaation toiminnalle ovat suotuisammat kuin metsäteillä, joiden kunto vaihtelee huomatta-vasti. Seuraavan 3–5 vuoden kuluessa ajoneuvojen automaatio painottuukin maantieajamiseen ja täten metsäteille automaatiota ei ole sovellettavissa. Ajoneuvojen puutavaranosturit tulevat kehittymään ja kärkiohjausautomaatio yleistyy. Merkittävimmät kehitys-askeleet ajoneuvon sekä kuormanpurkukoneiden osalta tullaan kuitenkin saavuttamaan suljetuilla tehdas- ja terminaalialueilla, joskaan ei aluksi laajassa mittakaavassa. Puutavaranosturin täysautomatisointiin liittyy paljon haasteita, joten täysautomatisointi ei ole tarkastelluilla aikahorisonteilla todennäköistä. Yli viiden vuoden kuluttua suljetuilla alueilla nähtiin olevan laajasti käytössä korkealle automatisoituja ajoneuvoja sekä kuorman-purkukoneita. Maanteillä korkea automaatio on mahdollista ja erilaiset letka-ajamisen muodot eritoten vakioreiteillä sivutuotehak-keen kuljetuksessa arvioitiin olevan operatiivisessa käytössä. Yli viiden vuoden päästä jonakin ajankohtana nähtiin myös metsä-tieajamiseen suunnattu automaatio mahdollisena, joskaan ajankohtaa ei osattu määrittää. Automaation arviotiin kohtaavan paljon haasteita ainespuun autokuljetuksen toimintaympäristössä, ehkä merkittävimpinä teknolo-giset haasteet, tieverkon kunto sekä vastuukysymysten epäselvyydet. Vastuiden epäselvyydet osin myös haittaavat automaation hyväksyttävyyden syntymistä. Mikäli automaatiojärjestelmien ja kuljettajan väliset vastuut eivät ole selviä ja yksiselitteisiä, eivät kuljetusyrittäjät halua ottaa automatisoituja ajoneuvoja käyttöönsä. Automaatiolla kuitenkin arvoitiin olevan saavutettavissa hyötyjä tehokkuuden, kustannusten, turvallisuuden, ympäristövaikutusten ja kuljettajien työssä viihtyvyyden ja kuljettajatyövoiman saata-vuuden suhteen. Hyödyt arvioitiin olevan helpoiten saavutettavissa suljetuissa tehdas- ja terminaaliympäristöissä, joissa muuta liikennettä on mahdollisuus rajoittaa. On kuitenkin otettava huomioon, etteivät kaikki hyödyt ole täysin yksiselitteisiä, vaan niiden tavoittelulla automaation keinoin saattaa olla myös kääntöpuoli. Esimerkiksi turvallisuuden parantuminen automaattisin ajamis- ja kuormaustoiminnoin voi vähentää inhimillisistä virheistä johtuvia onnettomuuksia, mutta voi tuoda uusia riskejä tullessaan, esi-merkkeinä ohjelmointiperäiset virheet sekä älykkäiden järjestelmien toiminnan ennakoimattomuus.
  • Lindroos, Robin (2021)
    Tämän työn tarkoituksena oli selvittää, onko mahdollista avoimia paikkatieto- ja kaukokartoitusaineistoja hyödyntäen luoda kasvupaikkatyyppiä ennustava malli, jonka ennuste olisi tarkempi kuin saatavilla oleva, koko Suomen kattava Luonnonvarakeskuksen tekemä kasvupaikkamalli. Viime vuosikymmenen aikana avointen paikkatietoaineistojen saata-vuus on lisääntynyt moninkertaisesti. Taustalla on EU:n säätämä INSPIRE-direktiivi 2007/2/EC (EU 2007), jonka tavoit-teena on yhteiskäyttöiset paikkatiedot ja yhteinen paikkatietoinfra-struktuuri. Tässä työssä hyödynnetään useita paikka-tieto- ja kaukokartoitusaineistoja, jotka ovat tulleet avoimeen käyttöön maksutta INSPIRE-direktiivin ansiosta. Aineistojen pohjalta on tunnistettu viisitoista mahdollista muuttujaa, jotka voisivat selittää kasvupaikkatyyppiä. Kaksitois-ta muuttujaa kuvaa topografiaa ja pohjautuvat suoraan tai välillisesti korkeusmalliin, yksi muuttuja kuvaa kasvukauden kokonaissadantaa, yksi muuttuja kuvaa maaperää ja yksi muuttuja on valtapituuden kasvuun pohjautuva kasvupaikka-tyyppiennuste. Valtapituuden kasvuun pohjautuvalle kasvupaikkatyyppiennusteelle kehitettiin malli, joka perustuu mänty-, kuusi- ja koivumetsiköiden kasvatusmalleihin. Näiden muuttujien pohjalta sovitettiin regressioanalyysiä hyödyntäen kasvupaikkatyyppiä ennustavia malleja. Referenssiaineistona käytettiin Suomen metsäkeskuksen kaukokartoituskoealo-ja pohjoisen napapiirin eteläpuolelta. Koealoihin on merkitty kasvupaikkatyyppi, johon malli sovitettiin. Tässä työssä kehitetty paras malli ennustaa mittareiden mukaan kasvupaikkatyyppiä tarkemmin kuin Luonnonvarakes-kuksen kasvupaikkamalli. Paras malli käyttää selittäjinä valtapituuden muutokseen perustuvaa kasvupaikkatyyppiennus-tetta, maalajia, korkeutta merenpinnasta, topografista sijainti-indeksiä (TPI), ”cartographic depth-to-water” -indeksiä (DTW) sekä kasvukauden kokonaissadantaa. Toiseksi paras malli ei hyödynnä maalajia selittäjänä, sillä Geologian tutkimuskeskuksen tuottama maaperäkartta ei kata koko Suomea. Malli käyttää selittäjinä valtapituuden muutokseen pe-rustuvaa kasvupaikkatyyppiennustetta, maalajia, korkeutta merenpinnasta, topografista sijainti-indeksiä (TPI), ”carto-graphic depth-to-water” -indeksiä (DTW), topografista kosteusindeksiä (TWI), kasvukauden kokonaissadantaa sekä auringon potentiaalista kokonaissäteilytystä. Selitysvoimaltaan paras muuttuja perustuu valtapituuden kehityksen tarkasteluun useamman ajankohdan laserkeilausai-neistoja hyödyntäen. Muuttujasta saatavat kasvupaikkatyyppiennusteet ovat sitä tarkemmat, mitä enemmän havaintoja aikasarjassa on. Tämän takia tässä työssä kehitettävän mallin parantamisen ja jatkokehittämisen kannalta olennaista on useamman ajankohdan laserkeilausaineistojen saatavuuden lisääminen. Malli hyödyntää 1970-luvulla kehitettyjä kasva-tusmalleja. On viitteitä siitä, että Suomessa puusto kasvaa nykyään nopeammin kuin 30–40 vuotta sitten. Tulevissa tutki-muksissa tätä kasvun muutosta olisi syytä tutkia tarkemmin ja huomioida se kasvupaikkatyyppiä ennustavien mallien jatkokehittämisessä.
  • Dmitrijeva, Anastasija (2023)
    The construction sector is a substantial contributor to waste and global carbon emissions due to the extraction and consumption of natural resources. Scholars underscore the critical importance for the construction sector to embrace the principles of the circular economy (CE), with a central focus on the efficient and careful use of natural resources, promoting material reuse and avoiding waste. Previous research conducted on the CE transition within the construction sector has shown a gap in addressing its material perspective. In Finland, the use of wood in construction is actively promoted by the government due to its potential to reduce industry’s carbon emissions. However, most used wood materials and waste from construction end up in energy recovery processes releasing absorbed carbon. This study explores the reasons for the limited wood recirculation within the shortest and most preferable loops in construction sector in Finland. The qualitative research data is based on 12 semi-structured qualitative interviews with professionals working either directly or closely to the construction sector. Employing the method of thematic analysis, this study endeavors to discover barriers, drivers and opportunities associated with recirculation of wood in the construction industry of Finland. While the findings of this study were found to be aligned with previous research that has identified barriers and drivers to CE implementation both within the construction industry and more broadly, multiple new wood-specific challenges were identified. The research findings demonstrate the necessity of adopting a holistic and systematic approach to increasing wood recirculation in construction and underscore the significant role of mediating actors, such as management of material hubs, in facilitating its implementation. This study suggests that supported by mediating actors, the development of the business ecosystem for circulated wood, enhancement of construction industry’s experience beyond internal projects is needed. Harmonization of the industry’s practices within the interplay of CE and bioeconomy thinking would promote wood recirculation in construction.
  • Blomberg, Laura (2022)
    Since the 1980s, international funding provided by diverse and changing donors has significantly changed Madagascar’s conservation landscape. The various challenges and development needs related to biodiversity conservation and its international funding have long been known to the international community and solutions have been sought. Despite this, deforestation and the destruction of the environment in Madagascar continue. The aim of this study was to identify the perceptions of various stakeholders on the current challenges and development needs for biodiversity conservation and its international funding in Madagascar by using qualitative methods. This study was based on 26 semi-structured interviews. The interviewees represented stakeholders involved in internationally funded biodiversity conservation projects in Madagascar. 14 of these interviews were conducted specifically for this study. The remaining, 12 interviews were from the material collected for the research project “Conservation Legacies: Understanding the Long-term Impacts of Private Foundation Investment in International Biodiversity Conservation”. The qualitative content analysis combining a deductive and inductive approach revealed a number of different challenges and development needs that were strongly interlinked. The identified challenges were related to, for example, weak governance and its different indicators, political instabilities, poverty and internal migration, donor requirements, insufficient amount of funding, funding gaps, dependency of international funding, donor-driven priority setting, lack of coordination, and the challenges posed by the operating environment. The identified development needs included the need for longer funding cycles, flexibility, stronger local participation, more holistic and cross-sectoral approaches, and involvement of private sector. Extensive cooperation across actors and sectors is still needed to tackle the challenges and put development needs into practice. Without this, there is a risk that the objectives for conserving biodiversity and making development aid more effective will not be achieved. Achieving these objectives would be supported by research into how the prioritisation and ownership of biodiversity conservation could be increasingly transferred to the local level, while ensuring that all aspects of sustainable development - social, ecological and economic – are considered.
  • Waldmann, Salla (2023)
    Carbon dioxide (CO2) has an important role in tree functioning, as it is needed for photosynthesis, used in biomass growth, and released in respiration. Stem CO2 efflux depends mainly on the stem respiration, which is why air temperature is the best predictor of the efflux. Most of the respiratory CO2 is released to the atmosphere, while a part is re-fixated in woody tissue photosynthesis and some dissolves in xylem water and is transported up along the stem in the sap flow. Stem CO2 efflux rate is therefore also affected by solar radiation and vapour pressure deficit. CO2 efflux varies vertically within the stem, as respiration rate is higher in the younger parts of the stem, younger parts have thinner bark and thus smaller diffusion barrier, and since some CO2 is transported up along the stem in the sap flow the increased xylem gas-to-water ratio in the higher parts of the stem accelerates the diffusion rate of CO2. Studies of stem CO2 efflux that use long-term data are rare. Long-term measurements enable the study of seasonality, annual variations, and the effect of different environmental factors more deeply than shorter measurement periods or point measurements allow. Chamber measurements give information on the gas exchange of a single component and its reactions to environmental factors. Long-term chamber measurements are therefore important in understanding forest carbon balance. This thesis analyses long-term stem chamber CO2 flux data measured continuously year-round at the SMEAR II station in the years 2010 – 2020. It studies the differences of different stem chamber types used in collecting the data, how the stem CO2 dynamics vary annually, seasonally, diurnally, individually, between two boreal tree species (Pinus sylvestris & Betula pendula) and vertically within the stem, and how different environmental factors affect the efflux. The data consists of two steady-state chamber types (measured in 2010 – 2012 and 2012 – 2016, respectively) and one dynamic chamber type (measured in 2016-2020) attached to one birch tree and four pine trees. The effects of environmental factors were studied through the temperature-dependence of respiration. It was modelled from the night-time efflux, as during night photosynthesis does not occur and sap flow is almost non-existent, and was utilized to predict whole-day respiration. Modelled respiration values were reduced from measured values and the part of stem efflux that was not caused by respiration but with photosynthesis and sap flow was left. The different chamber types were analysed with correlations of chamber and ambient temperature. Monthly and yearly effluxes were estimated and compared, and monthly estimates were normalized to compare the seasonality of the efflux. The results indicate that the stem CO2 efflux varies between years, seasons, species, individuals and vertically within the stem. The seasonal dynamics of birch occur more suddenly while the dynamics of pine increase and decrease more gently in spring and autumn, which might be due to birch being a deciduous and pine a coniferous species. There was clear vertical variation in stem CO2 efflux rates, which was possibly due to differences in growth respiration rates in different heights of the stem. The difference in the efflux sizes between higher and lower measurement point was higher in warmer months, and the efflux followed air temperature more closely in the higher measurement point. Photosynthesis and sap flow both decreased the stem CO2 efflux especially in warmer months, and sap flow had also a slight positive effect on the efflux when transpiration was low. The dynamic chamber type had chamber conditions closest to ambient conditions due to its adequate air mixing and can be said to alter the measurement results less than the two steady-state chamber types. This thesis highlights the importance of long-term continuous measurements of stem CO2 flux in the future. Annual, seasonal, individual, and vertical variation together with species stem CO2 efflux dynamics should all be accounted for when upscaling the efflux to stem- or stand-scale.
  • Aaltio, Anniina (2022)
    Rakennusteollisuuden suuret päästöt, alati nouseva ympäristötietoisuus ja tavoitteet kohti hiilineutraaliutta yhdessä väestönkasvun kanssa ajavat rakennusteollisuutta vääjäämättä keskelle muutosta. Puukerrostalojen on nähty toimivan yhtenä ratkaisuna tämän muutoksen edesauttamiseksi. Puukerrostalohankkeiden ekosysteemiin liittyvillä toimijoilla onkin täten mahdollisuus yhdessä toimien löytää uusia rakennusalan innovaatioita, joilla vastata koko alan kohtaamiin ulkopuolelta tuleviin muutostekijöihin, jotka osaltaan luovat painetta niin sisäisesti kuin ulkoisesti. Tämän tutkimuksen tarkoituksena oli saada parempi käsitys liiketoimintaekosysteemikonseptin soveltuvuudesta puukerrostalohankkeisiin ja miten hanketoiminta tukee ekosysteemin toimintaa. Ensimmäisellä tutkimuskysymyksellä pyrittiin saamaan vastauksia yhteistyöstä ja viestinnästä. Toinen tutkimuskysymys käsitteli puukerrostalohankkeissa mukana olleiden toimijoiden ympäristötietoisuutta. Tutkimus toteutettiin tekemällä 10 teemahaastattelua, jotka liittyivät kolmeen eri puukerrostalokohteeseen, jotka sijaitsivat Suomessa eri paikkakunnilla. Tutkimuksen tuloksena havaittiin, että näiden kolmen puukerrostalohankkeen liiketoimintaekosysteemit muodostavat useiden eri toimijoiden verkostoja, jotka toimivat ekosysteemin eri tasoilla yhteisenä päämääränään tuottaa laadukasta ja ympäristöystävällistä rakentamista, joka osaltaan lisää maamme hiilivarastojen määrää. Tätä edellyttää toimijoiden välinen yhteistyö, jossa viestintä koettiin pääsääntöisesti sujuvaksi. Toisaalta haasteita oli havaittavissa keskinäisessä kommunikoinnissa ja toimintatapojen yhteensovittamisessa, johtuen työskentelystä uuden asian äärellä. Aikataulutus, tutut toimijat sekä materiaalitoimittaja vaikuttivat positiivisesti hankkeen lopputulokseen. Hiilijalanjälki ja -kädenjälki laskelmiin toivottiin yhteneväisiä laskentatapoja, jotta vertailtavuus lisääntyisi. Hankkeissa tunnistettiin rakennusten potentiaali hiilivarastona ja puukerrostalohankkeiden ympäristömerkitys nähtiin suurena. Hankkeessa mukana olleet toimijat kokivat, että tarvittaisiin asennemuutosta niin kuluttajien kuin rakennusteollisuuden osalta, jotta puukerrostalohankkeiden määrää saataisiin nostettua. Nähtävissä oli haastateltujen taholta pohdintaa siitä, ovatko yritykset tarpeeksi laajasti omaksuneet ympäristöajattelun ja tullaanko asetettuihin vastuullisuustavoitteisiin pääsemään niin yrityksissä kuin laajemmalti rakennusteollisuuden puolelta. Tästä huolimatta puukerrostalorakentaminen nähtiin positiivisena asiana, jonka myötä on mahdollisuus ottaa askel kohti nykyrakentamista kestävämpää tilaa ja siten olla osana suurempaa, yhteistä muutosta, johon pääseminen edellyttää toimialat ylittävän yhteistyön laajentumista. Tämä kuitenkin vaatisi rakennuskäytäntöjen muuttamista ja rohkeutta tehdä asioita uudella tavalla sekä avoimempaa yhteistyötä eri toimijoiden keskuudessa.
  • Teräväinen, Venla (2021)
    Water interaction at cellular level has been investigated in Scots pine (Pinus sylvestris L.) sapwood section of acetylated and paraformaldehyde-treated woodblocks. Unmodified wood samples were used as reference samples. Acetyl group from acetic anhydride bounded to H of OH sorption site whereas paraformaldehyde bound to the sorption site and also create a cross-linking. Both mechanisms cause hindrance towards the accessibility of available sorption site but up to what extent which is unknown. With our designed approach, we can estimate the moisture uptake in both treatments. Knowledge of the cellular level changes is important to define wood physical properties. Wood is hygroscopic material which tend to reach to equilibrium moisture content. It causes dimensional instability and fungal degradation. The number of accessible OH sites correlates with wood’s ability to uptake moisture. Acetyl and methyl groups occupy the accessible sorption sites and limit the availability of free sites. Gravimetrical estimation of the available OH sites can relate to the effect of cross-linking and hindrance towards water molecules. Both modification methods reduced the equilibrium moisture content (EMC) and the sorption hysteresis. Maximum WPG of acetylation (17%) reduced 15.63% moisture content (MC). Maximum formalization WPG (7,5%) reduced 15.09% MC. Acetylation reduced water sorption through the relative humidity (RH) range 0-95%, whereas formalization reduced water sorption steadily, but only above 20% RH. This difference was caused by the cross-linking, which increased the stiffness of the cell wall polymers. The shape of sorption hysteresis was similar in all the samples. Still, formalization reached the maximum hysteresis at a lower point related to the other samples. Accessible sorption sites also reduced by modifications. Acetylated wood reduced the greatest amount of OH groups according to its high WPG value, 16%. The reduction of OH accessibility was steady with acetylation. In formalization, the reduction of accessible sorption sites was rapid and constant. With our developed method, we can precisely investigate the OH accessibility of both treatments, which can reveal the fundamental aspect of water uptake related to its structural changes at the cellular level.
  • Sinisalo, Viivi (2021)
    Purpose: The changing global economy has presented uncertain factors in future development. To keep up with the competition, companies have launched partnership programs. Many organizations seek strategic partners to enhance their positions, create joint business development and marketing opportunities, and that way strengthen their competitiveness. Methods: The objective of this study is to discover the characteristics of a partnership program in a Finnish software company. Quantitative methodology is used to examine how accurately partners can be distinguished from non-partners. Furthermore, this study introduces how customer focus should be incorporated based on a partner portfolio analysis. Also, it suggests how to derive improvements to a partnership program based on a partner portfolio analysis. Results: The main finding of this research is that partners are more profitable from the sales perspective. Their net sales have increased more during the five years, almost all of them have bought again at least once after the first purchase, and all of them increased their net sales when joining the partnership program. In addition, grown marketing and sales costs have led to an increase in partners’ net sales, which correlates with a number of joint marketing activities. This study suggests case company to focus on technology partners the most, as they are the most profitable from both sales and marketing perspectives. Based on the theoretical framework and empirical research results, proposals for further academic research are given in the thesis.
  • Parkkulainen, Evi (2024)
    As the impacts of climate change have become more tangible and severe, it has become clear that changing the approach to resource consumption is crucial. The housing and construction sector has a major role to play in the fight against climate change, as it accounts for around 50% of all material consumption, and the construction sector is also responsible for over 35% of the EU's waste generation. The circular economy (CE) is commonly viewed as a substitute for the traditional linear economic model and therefore it is widely seen as one of the possible solutions for decarbonizing the housing and construction sector and, at the same time, as one of the solutions for tackling climate change. This thesis focuses on exploring the sustainability and circular economy activities of stakeholders in the Finnish housing and construction sector. A particular focus is on the circular economy actions, which will be analyzed with the ReSOLVE framework. Also, the suitability of the framework for mapping circular economy actions in the housing and construction sector will be explored. The thesis thus aims to answer the following research questions: how sustainability and the circularity are visible in the activities of stakeholders in the Finnish housing and buildings sector, and how suitable the ReSOLVE framework is for assessing circularity in this sector. The qualitative research data consists of fourteen stakeholder interviews, which were also complemented by background documents provided by the stakeholders. By utilizing content analysis and the ReSOLVE framework, it was found that the self-designated sustainability activities of the stakeholders were mostly either knowledge generation, dissemination or influencing activities, but the ReSOLVE framework also revealed a wide range of circularity activities already present in the stakeholders’ actions. The framework also worked as a tool to bring forward different aspects of circularity that would not necessarily have been discovered with other more traditional CE frameworks. The qualitative results suggest that within the stakeholder group there are different ways of implementing the circular economy across the different CE dimensions, and that the circular economy is therefore not a one-dimensional activity that is either implemented by an actor or not. The results also support previous literature that a holistic and systemic approach is needed to achieve sustainability transition in the construction and housing sector.
  • Kettunen, Kaisa (2022)
    This Master’s thesis compares different nature and recreation associations in terms of their activity to organize species observation activities and collect species data. The aim is to fill gaps in knowledge concerning on which volunteer groups are actively producing data, and if some of them could be included stronger in biodiversity monitoring and evaluation work. Further, the thesis evaluates how important the Finnish Biodiversity Information Facility (FinBIF) is for different nature and recreation associations as a data sharing channel. The main study material was collected by a qualitative questionnaire that was sent to variety of different nature and recreation associations. As a result, species enthusiast associations, hunting associations and nature conservation associations were shown to be the most active in organizing species observation, that is in accordance with earlier studies such as Santaoja (2013). From other studied groups the Scouts surprisingly showed relatively high interest toward species observation, but they were not active in data sharing. Evaluating associations willingness to use the FinBIF’s services and devises for observation data sharing, revealed, that the FinBIF’s channel was not popular among the studied associations, keeping in mind that the study did not examine FinBIF’s popularity among individual volunteers. In the light of the results, the FinBIF services and the concept of citizen science should be more actively promoted toward nature and recreation associations, especially to the Scouts who would be potential group to co-operate with in biodiversity monitoring and evaluation work.
  • Vahteristo, Väinö (2023)
    The textile industry is in a need of various solutions to address its sustainability and responsibility issues and goals the industry players have set. Sustainable textile material sourcing plays a remarkable role as a solution for such issues. In addition to sourcing cotton, polyester or other conventional textile materials, next generation textile fibres are a part solution for the industry. However, market diffusion of such innovative products is a complex process. Purpose of the study is to study the innovation commercialisation and innovation selling from the point of view of a start-up or an innovator company that develops such technologies for the market. The literature part of the study defines the key determinants for a successful innovation commercialisation, which are reflected to results of semi-structured interviews with innovators from the industry. By collecting views and perceptions by textile brand owners and consumers, the study forms a practical pathway for innovators to make their commercialisation process succeed, ultimately, in support to tackle the sustainability issues of the industry. Results of the study elaborate the importance of flowing exchange of information throughout the textile value chain. Information flow is based on the value propositions of the innovation, which function as core values of innovators’ team building and communication with the value chain and the consumers, to build grounds for innovation acceptance and market diffusion. Reciprocally, collecting feedback from both is crucial to adapt to expectations flexibly. Lack of consumer awareness and, therefore, currently slow implementation pace of next generation textile fibres by the brand owners limit the resources of innovators and slow down market diffusion. The study finds that the role of brand owners in shifting consumer perceptions of prevailing issues in the industry is centric. Generally, consumers find the sustainability topics the brand owners promote and state to be addressing, as the most concerning. Therefore, as the brands are sparsely involving or offering next generation textile fibres as solutions for the issues, consumers do not see them as sufficient solutions. The study concludes that commercialisation of next generation textile fibres requires better facilitated educative information flow from innovators with all stakeholders of the process to build consumer demand and to activate the value chain. The most evident measure for it would be the better utilisation of various key opinion leaders. Well facilitated information flow and early start of educative sharing of information are centric for the successful market diffusion.
  • Kaislasalmi, Emmi; Kaislasalmi, Emmi (2024)
    Laos is regarded as one of the world's biodiversity hotspots. Yet, like in many tropical countries, biodiversity in Laos has been decreasing at an alarming rate. Forest degradation and deforestation have led to many flora and fauna species becoming threatened or even extinct. Furthermore, they have also had detrimental impacts on ecosystem services, compromising human safety and well-being. This research aimed to investigate the floristic diversity and forest structure across different Lao forest categories and understand the socio-ecological implications on forests in Laos. The research was divided into three segments: a forest inventory, interviews with local people within two villages, and an interview with a local forest officer. The forest inventory was conducted in three different forest categories: conservation, protection, and production forests in Luang Prabang Province, using systematic plot sampling. The total sampling size was 1.2 hectares within 60 plots, 20 in each forest site, each plot measuring 200 m2. Furthermore, the interviews with the local people were conducted as focus group discussions in villages near the inventory sites, and the forest officer was interviewed in the city of Luang Prabang. These interviews aimed to understand how socioeconomic and other social factors influence the forests and conservation efforts. The study found significant differences between the forest categories. The conservation and protection forests shared similarities both structurally and in terms of species composition but were different from the production forest. Moreover, the woody and climber species richness were significantly lower in the production forest compared to the two other forest categories. The interviews revealed that the local people depend on access to forests and forest products, but the low-income households were particularly reliant on them. The study also found that even if the local people had positive attitudes towards forest conservation, the lack of alternative livelihood opportunities and insufficient funding are the primary barriers to effective conservation efforts. These findings highlight the need to address the diversity differences between the forest categories through adequate forest planning and management. However, this requires funding, which proved to be one of the critical factors in achieving more effective and sustainable forest management in Laos. The findings also underscore the urgency of addressing socio-economic factors in conservation planning. The study found that diversifying livelihood opportunities is crucial for forest sustainability and human well-being. Future conservation initiatives should enhance socio-economic aspects and the well-being of local people in addition to caring for the environmental aspects. This integrated approach ensures the sustainability of both natural ecosystems and local livelihoods, increasing the potential for sustainable and long-term positive outcomes.
  • Manninen, Mikko (2024)
    The global drive towards low-carbon construction has focused attention on the utilisation of wood in multi-storey construction (WMC). The enabling regulatory and legislative actions and the promotion of wood construction have not increased the share of wood in multi-storey construction as predicted, which indicates that there are underlying factors hindering the wider utilisation of wood materials in construction and the construction of wooden multi-storey buildings. This qualitative study examined the perceptions and attitudes of construction site personnel towards WMC. The aim of the study was to identify the perceptions and attitudes of an important target group in the construction sector, which had not been highlighted in existing literature, by utilising the theory of planned behaviour. The study aims to uncover the perceptions and attitudes of construction site personnel to fill the current knowledge gaps, provide information on where to focus actions that facilitate WMC, and initiate discussion on the factors influencing the attitudes. Fifteen semi-structured interviews were conducted between February-April 2024 with individuals, who are actively involved in the operations of construction sites during the construction and renovation phases. These individuals are responsible for the operations, implementation, and other administrative activities on the construction sites. The results of the thematic analysis indicated that construction site personnel held varying, yet generally positive attitudes towards WMC. There was a notable variation in attitudes between the different construction personnel groups. The perceived benefits and strengths that contributed to more positive attitudes towards WMC were assessed through factors such as the environmental friendliness and low emissions of wood materials, ease of workability, aesthetic appeal, and the material's lightness and breathability. The attitudes towards WMC were hindered by the factors perceived as weaknesses and challenges of wood materials and WMC. These included the unestablished position of WMC, lack of knowledge and material information, moisture-related challenges, fire safety, and economic factors. Normative beliefs of the Finnish construction sector were perceived to affect the attitudes, as the perceived work communities’ attitudes either facilitated or hindered the individual’s attitude towards WMC. Previous experiences did not significantly influence attitudes towards WMC. Instead, knowledge and information had a greater impact on attitudes. Sharing knowledge and increasing the availability of information about WMC was identified as a key solution to improving attitudes towards WMC in Finland, given the slow pace of change in the Finnish construction sector and its tendency to rely on established standards and practices.
  • Gaddis, Jonathan Andrew (2021)
    The purpose of this study is to explore the economic and operational environment factors that are contributing to the development of the secondhand smartphone market. The secondhand smartphone market is a fascinating subject. The market is relatively young, only coming into existence in the last eighteen years after the introduction of the first smartphones. However, it is in recent years that the market has seen massive growth and is considered to hold a great amount of potential for further growth. The case of secondhand smartphones and its growth are intriguing from a circular economy perspective. The example that smartphones represent for product life extension, added value creation and circular flows of consumption via systems of recycling, refurbishing and reselling offer insight into the potential of circular economy frameworks for other industries and product categories. Seeking to understand what factors are contributing to the secondhand smartphone markets development also offers insights for actors, such as businesses, policy makers and academics. Such research enables the various actors to better understand the dynamics of their operating environment. Essentially, understanding what factors are contributing to the market’s development allows actors to make more informed decisions, to develop sound strategy and to allocate resources. This study was conducted as a combination quantitative and qualitative research. A quantitative approach has allowed for the sampling of a population of industry actors and to measure specific concepts, such as economic factors, via a survey. With the procurement of such data statistical analysis has been applied to understand the frequencies, correlations, and significance of the specific concepts under measurement. A qualitative approach has allowed for a more in-depth understanding and context of the survey results or where the survey results have been minimal. The results show a tendency for the business environment to be populated by companies that are vertically integrated, relatively new enterprises and have relatively small annual revenues. Additionally, the results show several clear factors that are contributing to the secondhand market’s development. The factors highlighted include the following: - The price of wholesale stock is not the main point of supply competition. With other sales terms playing such as available volumes, payment terms and stock quality playing a major role in terms of competition. - The improvement over time in the availability of smartphone devices on the wholesale market. - The strong role of relationships and developing long term partnerships. - The low barriers to entry and ease of acquiring secondhand smartphones on the wholesale market. - The growth in business networks and the need for specialization in business acumen and establishing industry wide standards. - Repairability of new models of smartphones is critical to growth and the protectionist position of OEMs. The finding paints a picture of a business environment that has low barriers to entry, generally localized small players.